My First Studio!

Hi friends! I am busily gearing up for my move to Baton Rouge, and I am so excited! Last week, I flew down there to "apartment hunt," check out more of the city, and meet once more with my future co-workers. I can't say that I really "hunted" for an apartment, however, because I ended up taking the first one that I saw. You guys, I'm completely in love with the apartment and the location! It's near campus, so I can walk to work, even though Baton Rouge is definitely a driving city - as a former New Yorker, being able to walk places is pretty critical to my happiness, so I'm thrilled with the location. But more importantly, it's a two bedroom apartment that costs about a third of the one bedroom I had in New York, and it's located in a complex with a pool, has a view of the lake, and, most importantly, has... wait for it... a washer and dryer IN THE UNIT! I know, right? Unheard of!

The reason that I'm extra excited about this place is that I'm planning to turn the second bedroom into... you guessed it... my very first studio! Or craft room, to put it less pretentiously, I guess. This is where my yarn stash and spinning wheel will live, and it's where I'll do my metalwork (it even has a window through which to vent the fumes from the E6000.) It'll be so nice to have a separate space for all of those things, rather than having it all over my living space. Until now, my "studio" has always consisted of a spot on the floor in front of the television... but now, I'll have a real craft room, and hopefully be inspired to create more (and more consistently!)

I don't have any pictures of the apartment yet, but I will definitely try to post some as I get things set up. For now, here's a picture of University Lake as taken from campus. My building is on the other side... if you look to the left of the photo, near the bridge, that's where I'll be!

Adventures in Spinning: A Tale of Steampunk Yarn

Custom spinning... talk about pressure!  Someone has made a special request and is anxiously awaiting a beautiful, perfect skein of soft yarn spun precisely to their specifications.  Your creative freedom depends upon the extent to which they've decided to relinquish control over the design.  And then there's the giving away part... assuming you do attain perfection, you immediately have to package up your work of soft, fluffy art and ship it off into the great beyond.

I recently had the privilege of spinning for Boston-based jewelry designer and animal activist Claudia Bruno, who has become a great friend and mentor to me when it comes to jewelry design and metal collage.  Claudia and I hit on the idea of a steampunk art yarn while chatting on Etsy, and we both got really excited about the idea.  For me, the idea of spinning a steampunk yarn was fascinating, because it would involve spinning in hardware - Claudia and I discussed gears, watch parts, brass jewelry findings, and even pieces of barbed wire.  While I'd worked with a variety of different spin-ins in the past and thought I could use the same techniques, I knew that it would be a challenge to find exactly the right pieces of hardware that wouldn't be too heavy and that would fit through all of the orifices and hooks on my spinning wheel, but that would still give the yarn the beautiful steampunk look that we were trying to achieve.

I was lucky in that Claudia gave me almost one hundred percent creative freedom over the project.  The only things that we really decided on up front were that the yarn would be some shade of brown, with gold or bronze angelina sparkle, and that she would pick out the spin-ins from her own stash and mail them to me.  The first thing I did was search Etsy for the perfect spinning fiber, and I found it pretty quickly in a batt called "Sepia," from Unwind Yarn Company.  A little while after I received the fiber, a big bag of gears, beads, watch hands, and brass roses arrived in the mail.  Joy!  Only another spinner can imagine the excitement I felt when I looked at that stuff and pictured it in a skein of yarn.  A couple of weeks later, those gears and roses and watch hands and fiber had been transformed into a huge skein of remarkably plush and squishy steampunk yarn!

As for the process...

The first thing I did (after weeding out any pieces that wouldn't fit through the plying head of my spinning wheel) was to pull off small strips of fiber (about 1/2 thick and 3 inches long) and thread them through the metal pieces that had larger holes, such as the gears (you can see one of those in the picture above) and the watch hands (pictured below.)

I then spun a super bulky weight, thick and thin single, feathering in the strips of fiber with the metal pieces attached.  I spun this directly onto the plying head of my Lendrum DT, because the orifice and hooks are considerably bigger than on the regular one.

Once I had my single, I wound it off so that I could use the bobbin a second time, and then I used gold metallic sewing thread and threaded all of the smaller pieces (that is, the brass roses and very small brass beads) onto that.  I thread plied this with the single, allowing the occasional beehive to form, and not worrying too much about uniformity (this is art yarn, after all.)

The result was, in my opinion, spectacular.  Not to praise myself too much, but the results far exceeded my expectations when it came to this yarn.  I have to admit that there was a part of me that was afraid that this project would turn out to be a massacre... that the metal parts would be too heavy, or the thread plying would go haywire, and I would have to Claudia that I had ruined her yarn.  In the end, however, it was a wonderful challenge and a joy to spin.

I am so glad that I took on this project, and that Claudia allowed me the privilege of spinning for her.  I will definitely be working with watch hands again - in fact, I already have some on special order - and I'm still very much intrigued by the idea of that barbed wire...

So, our tale of steampunk yarn ends with success and the yarn's safe arrival in Boston.  Until next time...

Introduction...?

Well, here I am... blogging.  As far as I know, I have no followers... hence the title of this post.  I have to be honest, I've never really like the idea of blogging.  It's time consuming, I have nothing to say, blah blah blah.

Recently, however, I've come to realize that I may have more to say than I thought I did.  See, I recently opened an Etsy shop.  I'm not going to pretend that I'm some "great artist" - I just do what I enjoy.  I have been making jewelry, knitting, and spinning yarn for years now, and my space finally got so overwhelmed with finished projects and stashed supplies that I had to start selling it off.

When you start up an Etsy shop, you get inundated with newsletters full of marketing tips.  Most of them are filled with gorgeous photos and featured artists and pretty much just make you feel inadequate.  However, one of the many tips that they offer over and over (along with great pictures, a Facebook page, and a Twitter account) is to start a blog and talk about your shop.

Again I say, "blah blah blah."  Still I resisted.  The whole idea seemed self-indulgent, and frankly, I wasn't convinced that my shop would last for more than a couple of weeks.  I did, however, set up a Facebook page for my shop, and finally got with the program and learned how to Tweet.

And that's when I noticed something surprising... after awhile, my Facebook posts started getting longer.  I wanted to share everyday stuff with my shop followers in the same way that I do with my friends.  What song am I listening to today?  What fabulous new Chanel nail polish has caught my eye?  What does everyone think of that new translation of Anna Karenina? Who else watches Pretty Little Liars, and are you as obsessed with Aria's wardrobe as I am?

So this is the result.  Me, sitting here in bed with my laptop in the middle of the night... blogging to myself.  I suppose I'll have to publicize my blog at some point... blah blah blah.  In the meantime, if there's anyone out there... enjoy.